£18.99 Ex. VAT£22.79 Incl. VAT
In stock
Folex BG-71 is a crystal clear film, for Colour & Monochrome Laser Printers and Colour Copiers using low fusing temperature toners.
Ideally suited for overhead projection transparencies or see through overlays.
The film uses the same universal coating on both sides, eliminating any confusion when inserting sheets into the feed tray.
Size: A4
The Carl DC-210N A4 paper trimmer will cut up to 32 sheets of 80gsm paper in four slides.
The paper is securely held by a clamp which eliminates paper slippage during cutting.
The DC-210N comes with 2 straight blades (K28), 1 perforation blade (K29) and 2 cutting mats (DC210M).
The spare blade and cutting mat are neatly stored inside the trimmer.
It has a maximum cutting length of 310mm and only weighs 2.75kg.
EASY TO USE
Simply insert the paper, lower the clamp, then slide the blade along the bar.
The slide action may be repeated up to 4 times, depending on the amount of paper you are trimming.
The blades and cutting mats are very quick and safe to change.
When not in use, the clamping handle should be kept lowered to make sure the cutting mat stays in place during transportation.
Replacement blades (K28, K29 & K30) and spare cutting mats (DC210M) can be purchased separately.
Rotary Blade Safety Cover
Paper Locking Mechanism
Paper Guide
Handy built-in storage area for extra cutting blades and mats
Weight: 2.75kg
Dimensions: W:360mm x L:490mm x H:80mm
Folex X-10.0 – A3
Photocopier transparency film – for monochrome copiers.
Both sides have the same coating so can be printed on either side.
Coating suitable for dry toner copiers with good universal properties.
Not paperbacked.
Size: A3
Box Quantity: 50
Folex X-10.0
Photocopier transparency film – for monochrome copiers.
Both sides have the same coating so can be printed on either side. Coating suitable for dry toner copiers with good universal properties.
Not paperbacked, if you require a paperbacked version please look for X-10.2
Size: A4
Often used in school art departments
Box Quantity: 100
The Carl DC-230N A3 paper trimmer will cut up to 32 sheets of 80gsm paper in four slides.
The paper is securely held by a clamp which eliminates paper slippage during cutting.
The DC-230N comes with 2 straight blades (K28), 1 perforation blade (K29) and 2 cutting mats (DC230M).
The spare blade and cutting mat are neatly stored inside the trimmer.
EASY TO USE
Simply insert the paper, lower the clamp, then slide the blade along the bar.
The slide action may be repeated up to 4 times, depending on the amount of paper you are trimming.
The blades and cutting mats are very quick and safe to change.
When not in use, the clamping handle should be kept lowered to make sure the cutting mat stays in place during transportation.
Replacement blades (K28, K29 & K30) and spare cutting mats (DC230M) can be purchased separately.
Rotary Blade Safety Cover
Paper Locking Mechanism
Paper Guide
Handy built-in storage area for extra cutting blades and mats.
Weight: 3.25kg
Dimensions: W:360mm x L:610mm x H:80mm
