Guillotine & Trimmers
If you need to do a large amount of paper cutting, then give yourself a helping hand by using guillotine cutters and trimmers.
Showing 1–28 of 36 results
-
Carl B-01 Straight Blade
£6.50 Ex. VAT£7.80 Incl. VATAdd to basketCarl B-01 Straight Blade
£6.50 Ex. VAT£7.80 Incl. VATCarl replacement B-01 Straight Blade for use in the following trimmers:
RT-200 & RT-218 Paper Trimmer.
CC-10 Craft Cutter, DC-212 Paper Trimmer, DC-218 Paper Trimmer & PRT-100.
Also compatible with the Rotatrim EdgeMaster EM300.
Other available blades (sold separately):
B-02 – Perforating Blade
B-03 – Deckle Blade
B-04 – Short Wave Blade
B-05 – Pinking Blade
B-06 – Scallop Blade
B-07 – Squiggle Blade
B-08 – Victorian Blade
B-09 – Colonial Blade
B-10 – Wave Blade
B-11 – Scoring Blade -
Carl B-02 Perforating Blade
£6.50 Ex. VAT£7.80 Incl. VATAdd to basketCarl B-02 Perforating Blade
£6.50 Ex. VAT£7.80 Incl. VATCarl replacement B-02 Perforating Blade for use in the following trimmers:
RT-200 & RT-218 Paper Trimmer
CC-10 Craft Cutter, DC-212 Paper Trimmer, DC-218 Paper Trimmer & PRT-100.
Also compatible with the Rotatrim EdgeMaster EM300.
This blade will perforate three sheets of 80 gsm paper in one slide.
Other available blades (sold separately):
B-01 – Straight Blade
B-03 – Deckle Blade
B-04 – Short Wave Blade
B-05 – Pinking Blade
B-06 – Scallop Blade
B-07 – Squiggle Blade
B-08 – Victorian Blade
B-09 – Colonial Blade
B-10 – Wave Blade
B-11 – Scoring Blade -
Carl B-03 Deckle Blade
£6.50 Ex. VAT£7.80 Incl. VATAdd to basketCarl B-03 Deckle Blade
£6.50 Ex. VAT£7.80 Incl. VATCarl replacement B-03 Deckle Blade for use in the following trimmers:
RT-200 & RT-218 Paper Trimmer
CC-10 Craft Cutter, DC-212 Paper Trimmer, DC-218 Paper Trimmer & PRT-100
Also compatible with the Rotatrim EdgeMaster EM300.
This blade will cut one sheet of 80gsm paper.
Other available blades (sold separately):
B-01 – Straight BladeB-02 – Perforating Blade
B-04 – Short Wave Blade
B-05 – Pinking Blade
B-06 – Scallop Blade
B-07 – Squiggle Blade
B-08 – Victorian Blade
B-09 – Colonial Blade
B-10 – Wave Blade
B-11 – Scoring Blade -
Carl B-04 Short Wave Blade
£6.50 Ex. VAT£7.80 Incl. VATAdd to basketCarl B-04 Short Wave Blade
£6.50 Ex. VAT£7.80 Incl. VATCarl replacement B-04 Short Wave Blade for use in the following trimmers:
RT-200 & RT-218 Paper Trimmer
CC-10 Craft Cutter, DC-212 Paper Trimmer, DC-218 Paper Trimmer & PRT-100.
Also compatible with the Rotatrim EdgeMaster EM300.
This blade will cut one sheet of 80 gsm paper.
Other available blades (sold separately):
B-01 – Straight Blade
B-02 – Perforating Blade
B-03 – Deckle Blade
B-05 – Pinking Blade
B-06 – Scallop Blade
B-07 – Squiggle Blade
B-08 – Victorian Blade
B-09 – Colonial Blade
B-10 – Wave Blade
B-11 – Scoring Blade -
Carl B-05 Pinking Blade
£6.50 Ex. VAT£7.80 Incl. VATAdd to basketCarl B-05 Pinking Blade
£6.50 Ex. VAT£7.80 Incl. VATCarl replacement B-05 Pinking Blade for use in the following trimmers:
RT-200 & RT-218 Paper Trimmer
CC-10 Craft Cutter, DC-212 Paper Trimmer, DC-218 Paper Trimmer & PRT-100.
Also compatible with the Rotatrim EdgeMaster EM300.
This blade will cut one sheet of 80 gsm paper.
Other available blades (sold separately):
B-01 – Straight Blade
B-02 – Perforating Blade
B-03 – Deckle Blade
B-04 – Short-Wave Blade
B-06 – Scallop Blade
B-07 – Squiggle Blade
B-08 – Victorian Blade
B-09 – Colonial Blade
B-10 – Wave Blade
B-11 – Scoring Blade -
Carl B-06 Scallop Blade
£6.50 Ex. VAT£7.80 Incl. VATAdd to basketCarl B-06 Scallop Blade
£6.50 Ex. VAT£7.80 Incl. VATCarl replacement B-06 Scallop Blade for use in the following trimmers:
RT-200 & RT-218 Paper Trimmer
CC-10 Craft Cutter, DC-212 Paper Trimmer, DC-218 Paper Trimmer & PRT-100.
Also compatible with the Rotatrim EdgeMaster EM300.
This blade will cut one sheet of 80 gsm paper.
Other available blades (sold separately):
B-01 – Straight Blade
B-02 – Perforating Blade
B-03 – Deckle Blade
B-04 – Short-Wave Blade
B-05 – Pinking Blade
B-07 – Squiggle Blade
B-08 – Victorian Blade
B-09 – Colonial Blade
B-10 – Wave Blade
B-11 – Scoring Blade -
Carl B-07 Squiggle Blade
£6.50 Ex. VAT£7.80 Incl. VATAdd to basketCarl B-07 Squiggle Blade
£6.50 Ex. VAT£7.80 Incl. VATCarl replacement B-07 Squiggle Blade for use in the following trimmers:
RT-200 & RT-218 Paper Trimmer,
CC-10 Craft Cutter, DC-212 Paper Trimmer, DC-218 Paper Trimmer & PRT-100.Also compatible with the Rotatrim EdgeMaster EM300.
This blade will cut one sheet of 80 gsm paper.
Other available blades (sold separately):
B-01 – Straight Blade
B-02 – Perforating Blade
B-03 – Deckle Blade
B-04 – Short-Wave Blade
B-05 – Pinking Blade
B-06 – Scallop Blade
B-08 – Victorian Blade
B-09 – Colonial Blade
B-10 – Wave Blade
B-11 – Scoring Blade -
Carl B-08 Victorian Blade
£6.50 Ex. VAT£7.80 Incl. VATAdd to basketCarl B-08 Victorian Blade
£6.50 Ex. VAT£7.80 Incl. VATCarl replacement B-08 Victorian Blade for use in the following trimmers:
RT-200 & RT-218 Paper Trimmer,
CC-10 Craft Cutter, DC-212 Paper Trimmer, DC-218 Paper Trimmer & PRT-100.Also compatible with the Rotatrim EdgeMaster EM300.
This blade will cut one sheet of 80 gsm paper.
Other available blades (sold separately):
B-01 – Straight Blade
B-02 – Perforating Blade
B-03 – Deckle Blade
B-04 – Short-Wave Blade
B-05 – Pinking Blade
B-06 – Scallop Blade
B-07 – Squiggle Blade
B-09 – Colonial Blade
B-10 – Wave Blade
B-11 – Scoring Blade -
Carl B-09 Colonial Blade
£6.50 Ex. VAT£7.80 Incl. VATAdd to basketCarl B-09 Colonial Blade
£6.50 Ex. VAT£7.80 Incl. VATCarl replacement B-09 Colonial Blade for use in the following trimmers:
RT-200 & RT-218 Paper Trimmer,
CC-10 Craft Cutter, DC-212 Paper Trimmer, DC-218 Paper Trimmer & PRT-100.Also compatible with the Rotatrim EdgeMaster EM300.
This blade will cut one sheet of 80 gsm paper.
Other available blades (sold separately):
B-01 – Straight Blade
B-02 – Perforating Blade
B-03 – Deckle Blade
B-04 – Short-Wave Blade
B-05 – Pinking Blade
B-06 – Scallop Blade
B-07 – Squiggle Blade
B-08 – Victorian Blade
B-10 – Wave Blade
B-11 – Scoring Blade -
Carl B-10 Wave Blade
£6.50 Ex. VAT£7.80 Incl. VATAdd to basketCarl B-10 Wave Blade
£6.50 Ex. VAT£7.80 Incl. VATCarl replacement B-10 Wave Blade for use in the following trimmers:
RT-200, RT-218 Paper trimmer,
Carl CC-10 Craft Cutter, DC-212 Paper Trimmer, DC-218 Paper Trimmer & PRT-100.Also compatible with the Rotatrim EdgeMaster EM300.
Other available blades (sold separately):
B-01 – Straight Blade
B-02 – Perforating Blade
B-03 – Deckle Blade
B-04 – Short-Wave Blade
B-05 – Pinking Blade
B-06 – Scallop Blade
B-07 – Squiggle Blade
B-08 – Victorian Blade
B-09 – Colonial Blade
B-11 – Scoring Blade -
Carl B-11 Scoring Blade
£6.50 Ex. VAT£7.80 Incl. VATAdd to basketCarl B-11 Scoring Blade
£6.50 Ex. VAT£7.80 Incl. VATCarl replacement B-11 Scoring Blade for use in the following trimmers:
RT-200 & RT-218 Paper Trimmer,
CC-10 Craft Cutter, DC-212 Paper Trimmer, DC-218 Paper Trimmer & PRT-100.Also compatible with the Rotatrim EdgeMaster EM300.
Other available blades (sold separately):
B-01 – Straight Blade
B-02 – Perforating Blade
B-03 – Deckle Blade
B-04 – Short-Wave Blade
B-05 – Pinking Blade
B-06 – Scallop Blade
B-07 – Squiggle Blade
B-08 – Victorian Blade
B-09 – Colonial Blade
B-10 – Wave Blade -
Carl CC-10 Craft Cutter
£7.99 Ex. VAT£9.59 Incl. VATAdd to basketCarl CC-10 Craft Cutter
£7.99 Ex. VAT£9.59 Incl. VATThe Carl CC-10 Craft Cutter has a rotating head which offers 5 locking pre-set positions to provide optimum pressure on the materials you are trimming.
The quick change blade makes it easy to change or replace the cutting blades.This trimmer comes with a straight blade (B-01) and there are 10 other blade designs that are sold separately.
The CC-10 is a convenient tool to cut or pattern felt, paper, cloth, film and other materials.
Available Blades (sold separately): B-01 – B-11
-
Carl DC-210 / DC-212/ RT200/ EM300 Cutting Mat
£8.99 Ex. VAT£10.79 Incl. VATAdd to basketCarl DC-210 / DC-212/ RT200/ EM300 Cutting Mat
£8.99 Ex. VAT£10.79 Incl. VATPack of 2 cutting mats for the Carl DC-210 / DC-212 / RT200 A4 Paper Trimmer.
If the cutting mat on your paper trimmer is looking past its best then these Carl cutting mats will have it looking and performing as good as new.
If you don’t replace your old mat, then the cutting mat’s groove will become too deep and the blade will not cut as cleanly.
This cutting mat is also compatible with the following Carl Trimmers:
DC-100,DC-100N, DC-200, DC-200N, DC-210, DC-210N, DC-212, DC-300, DC-300N, PRT-100, PRT-100N, RT-200, RT-200N.
Also compatible with the Rotatrim EdgeMaster EM300. -
Carl DC-210N A4 Paper Trimmer/Cutter
£64.99 Ex. VAT£77.99 Incl. VATAdd to basketCarl DC-210N A4 Paper Trimmer/Cutter
£64.99 Ex. VAT£77.99 Incl. VATThe Carl DC-210N A4 paper trimmer will cut up to 32 sheets of 80gsm paper in four slides.
The paper is securely held by a clamp which eliminates paper slippage during cutting.The DC-210N comes with 2 straight blades (K28), 1 perforation blade (K29) and 2 cutting mats (DC210M).
The spare blade and cutting mat are neatly stored inside the trimmer.It has a maximum cutting length of 310mm and only weighs 2.75kg.
EASY TO USE
Simply insert the paper, lower the clamp, then slide the blade along the bar.
The slide action may be repeated up to 4 times, depending on the amount of paper you are trimming.
The blades and cutting mats are very quick and safe to change.
When not in use, the clamping handle should be kept lowered to make sure the cutting mat stays in place during transportation.Replacement blades (K28, K29 & K30) and spare cutting mats (DC210M) can be purchased separately.
Rotary Blade Safety Cover
Paper Locking Mechanism
Paper Guide
Handy built-in storage area for extra cutting blades and mats
Weight: 2.75kg
Dimensions: W:360mm x L:490mm x H:80mm -
Carl DC-218M Cutting Mat
£9.99 Ex. VAT£11.99 Incl. VATAdd to basketCarl DC-218M Cutting Mat
£9.99 Ex. VAT£11.99 Incl. VATPack of 2 cutting mats for the Carl RT-218 A3 Paper Trimmer.
-
Carl DC-230 Cutting Mat
£11.99 Ex. VAT£14.39 Incl. VATAdd to basketCarl DC-230 Cutting Mat
£11.99 Ex. VAT£14.39 Incl. VATPack of 2 cutting mats for the Carl DC-230 A3 Paper Trimmer.
This cutting mat is also compatible with the following Carl Trimmers:
DC230, DC-230N, DC-330, DC-330N. -
Carl DC-230N A3 Paper Trimmer/Cutter
£79.99 Ex. VAT£95.99 Incl. VATAdd to basketCarl DC-230N A3 Paper Trimmer/Cutter
£79.99 Ex. VAT£95.99 Incl. VATThe Carl DC-230N A3 paper trimmer will cut up to 32 sheets of 80gsm paper in four slides.
The paper is securely held by a clamp which eliminates paper slippage during cutting.The DC-230N comes with 2 straight blades (K28), 1 perforation blade (K29) and 2 cutting mats (DC230M).
The spare blade and cutting mat are neatly stored inside the trimmer.EASY TO USE
Simply insert the paper, lower the clamp, then slide the blade along the bar.
The slide action may be repeated up to 4 times, depending on the amount of paper you are trimming.
The blades and cutting mats are very quick and safe to change.
When not in use, the clamping handle should be kept lowered to make sure the cutting mat stays in place during transportation.Replacement blades (K28, K29 & K30) and spare cutting mats (DC230M) can be purchased separately.
Rotary Blade Safety Cover
Paper Locking Mechanism
Paper Guide
Handy built-in storage area for extra cutting blades and mats.
Weight: 3.25kg
Dimensions: W:360mm x L:610mm x H:80mm -
Carl DC-250 A2 Paper Trimmer/Cutter
£94.99 Ex. VAT£113.99 Incl. VATAdd to basketCarl DC-250 A2 Paper Trimmer/Cutter
£94.99 Ex. VAT£113.99 Incl. VATThe Carl DC-250 A2 paper trimmer will cut up to 20 sheets of 80gsm paper in four slides.
The paper is securely held by a clamp which eliminates paper slippage during cutting.The DC-250 comes with 2 straight blades (K28), 1 perforation blade (K29) and 2 cutting mats (DC250M).
The spare blade and cutting mat are neatly stored inside the trimmer.It has a maximum cutting length of 650mm and only weighs 4.2kg.
EASY TO USE
Simply insert the paper, lower the clamp, then slide the blade along the bar.
The slide action may be repeated up to 4 times, depending on the amount of paper you are trimming.
The blades and cutting mats are very quick and safe to change.
When not in use, the clamping handle should be kept lowered to make sure the cutting mat stays in place during transportation.Replacement blades (K28, K29 & K30) and spare cutting mats (DC250M) can be purchased separately.
Rotary Blade Safety Cover
Paper Locking Mechanism
Paper Guide
Handy built-in storage area for extra cutting blades and mats
Weight: 4.2kg
Dimensions: W:360mm x L:840mm x H:80mm -
Carl DC-250 Cutting Mat
£13.99 Ex. VAT£16.79 Incl. VATAdd to basketCarl DC-250 Cutting Mat
£13.99 Ex. VAT£16.79 Incl. VATPack of 2 cutting mats for the Carl DC-250 A2 Paper Trimmer.
-
Carl DC210/230 Replacement Blade Holder
£9.99 Ex. VAT£11.99 Incl. VATAdd to basketCarl DC210/230 Replacement Blade Holder
£9.99 Ex. VAT£11.99 Incl. VATCarl replacement blade holder – Fits the following Carl paper trimmers:
Carl DC-210N
Carl DC-230N
Blades sold separately – K28/K29/K30
-
Carl K28 Straight Blade
£7.99 Ex. VAT£9.59 Incl. VATAdd to basketCarl K28 Straight Blade
£7.99 Ex. VAT£9.59 Incl. VATPack of 2 straight blades for the Carl DC-210N, DC-230N & DC-250 range of Paper Cutters/Trimmers.
These blades are also compatible with the following Carl Trimmers: DC-220, DC-220N, DC-300, DC-330N -
Carl K29 Perforation Blade
£6.95 Ex. VAT£8.34 Incl. VATAdd to basketCarl K29 Perforation Blade
£6.95 Ex. VAT£8.34 Incl. VATPack of 1 Perforation blade for the Carl DC-210N, DC-230N & DC250 range of paper cutters/trimmers.
This blade is also compatible with the following Carl Trimmers: DC-220, DC-220N, DC-300, DC-330N -
Carl K30 Scoring Blade
£6.95 Ex. VAT£8.34 Incl. VATAdd to basketCarl K30 Scoring Blade
£6.95 Ex. VAT£8.34 Incl. VATPack of 1 Scoring blade for the Carl DC-210, DC-230 & DC250 range of paper cutters/trimmers.
This blade is also compatible with the following Carl Trimmers: DC-220, DC-220N, DC-300, DC-330N -
Carl RT-200 A4 Paper Trimmer
£40.99 Ex. VAT£49.19 Incl. VATAdd to basketCarl RT-200 A4 Paper Trimmer
£40.99 Ex. VAT£49.19 Incl. VATA versatile paper rotary trimmer ideal for craft work and smaller trimming jobs.
A variety of changeable pattern blades are available separately.
The Carl RT-200 A4 paper trimmer will cut up to 10 sheets of 80gsm paper with the straight blade or up to 3 sheets of paper with the perforating blade and 1 sheet of paper with the pattern blades.
The RT-200 comes with a B-01 blade and DC210M cutting mat included.
It has a maximum cutting length of 310mm and only weighs 1.5kg.
Dimensions: W:264mm x L:382mm x H:68mm
Handy built-in storage area for extra cutting blades and mats.
Suitable for paper up to 80gsm thickness
Printed Paper Guide on baseReplacement blades (B-01 to B-11) and cutting mat (DC210M) can be purchased separately.
-
Carl RT-200/218 Replacement Blade Holder (DC-212/218)
£5.99 Ex. VAT£7.19 Incl. VATAdd to basketCarl RT-200/218 Replacement Blade Holder (DC-212/218)
£5.99 Ex. VAT£7.19 Incl. VATCarl replacement blade holder – Fits the following Carl paper trimmers:
Carl RT-200
Carl RT-218
Carl DC-212
Carl DC-218
Blade not included
We have a full range of blades for the above trimmers – B-01 to B-11
-
Carl RT-218 A3 Paper Trimmer
£49.99 Ex. VAT£59.99 Incl. VATAdd to basketCarl RT-218 A3 Paper Trimmer
£49.99 Ex. VAT£59.99 Incl. VATA versatile A3 rotary trimmer ideal for craft work and smaller trimming jobs.
A variety of changeable pattern blades are available separately.
The Carl RT-218 A3 paper trimmer will cut up to 10 sheets of 80gsm paper with the straight blade or up to 3 sheets with the perforating blade and 1 sheet with the pattern blades.
The RT-218 comes with a B-01 blade and DC218M cutting mat included.
It has a maximum cutting length of 462mm and only weighs 2.5kg.
Dimensions: W:264mm x L:534mm x H:68mm
Handy built-in storage area for extra cutting blades and mats.
Paper size: Up to A3 462mm
Printed Paper Guide on baseReplacement blades (B-01 to B-11) and cutting mat (DC218M) can be purchased separately.
-
K-12 Perforation Blade
£5.99 Ex. VAT£7.19 Incl. VATAdd to basketK-12 Perforation Blade
£5.99 Ex. VAT£7.19 Incl. VATK-12 Perforation blade for DC-90 Carl paper trimmer
-
K-13 Straight Blade
£5.99 Ex. VAT£7.19 Incl. VAT