Premium quality gloss low melt laminating rolls.
455mm (18″) wide laminating roll.
75 micron film on a 25mm (1″) core.
75m on a roll.
For use with roll fed laminators only.
Ideal for encapsulating posters, flyers, menus, maps, notices and more
Priced individually, 2 rolls are needed (one for the top and one for the bottom)
The Carl DC-250 A2 paper trimmer will cut up to 20 sheets of 80gsm paper in four slides.
The paper is securely held by a clamp which eliminates paper slippage during cutting.
The DC-250 comes with 2 straight blades (K28), 1 perforation blade (K29) and 2 cutting mats (DC250M).
The spare blade and cutting mat are neatly stored inside the trimmer.
It has a maximum cutting length of 650mm and only weighs 4.2kg.
EASY TO USE
Simply insert the paper, lower the clamp, then slide the blade along the bar.
The slide action may be repeated up to 4 times, depending on the amount of paper you are trimming.
The blades and cutting mats are very quick and safe to change.
When not in use, the clamping handle should be kept lowered to make sure the cutting mat stays in place during transportation.
Replacement blades (K28, K29 & K30) and spare cutting mats (DC250M) can be purchased separately.
Rotary Blade Safety Cover
Paper Locking Mechanism
Paper Guide
Handy built-in storage area for extra cutting blades and mats
Weight: 4.2kg
Dimensions: W:360mm x L:840mm x H:80mm
The Carl DC-210N A4 paper trimmer will cut up to 32 sheets of 80gsm paper in four slides.
The paper is securely held by a clamp which eliminates paper slippage during cutting.
The DC-210N comes with 2 straight blades (K28), 1 perforation blade (K29) and 2 cutting mats (DC210M).
The spare blade and cutting mat are neatly stored inside the trimmer.
It has a maximum cutting length of 310mm and only weighs 2.75kg.
EASY TO USE
Simply insert the paper, lower the clamp, then slide the blade along the bar.
The slide action may be repeated up to 4 times, depending on the amount of paper you are trimming.
The blades and cutting mats are very quick and safe to change.
When not in use, the clamping handle should be kept lowered to make sure the cutting mat stays in place during transportation.
Replacement blades (K28, K29 & K30) and spare cutting mats (DC210M) can be purchased separately.
Rotary Blade Safety Cover
Paper Locking Mechanism
Paper Guide
Handy built-in storage area for extra cutting blades and mats
Weight: 2.75kg
Dimensions: W:360mm x L:490mm x H:80mm
The Carl DC-230N A3 paper trimmer will cut up to 32 sheets of 80gsm paper in four slides.
The paper is securely held by a clamp which eliminates paper slippage during cutting.
The DC-230N comes with 2 straight blades (K28), 1 perforation blade (K29) and 2 cutting mats (DC230M).
The spare blade and cutting mat are neatly stored inside the trimmer.
EASY TO USE
Simply insert the paper, lower the clamp, then slide the blade along the bar.
The slide action may be repeated up to 4 times, depending on the amount of paper you are trimming.
The blades and cutting mats are very quick and safe to change.
When not in use, the clamping handle should be kept lowered to make sure the cutting mat stays in place during transportation.
Replacement blades (K28, K29 & K30) and spare cutting mats (DC230M) can be purchased separately.
Rotary Blade Safety Cover
Paper Locking Mechanism
Paper Guide
Handy built-in storage area for extra cutting blades and mats.
Weight: 3.25kg
Dimensions: W:360mm x L:610mm x H:80mm
Premium quality gloss low melt laminating rolls.
305mm (12″) wide laminating roll.
75 micron film on a 25mm (1″) core.
75m on a roll.
For use with roll fed laminators only.
Ideal for encapsulating posters, flyers, menus, maps, notices and more.
Priced individually, 2 rolls are needed (one for the top and one for the bottom)
Premium quality gloss low melt laminating rolls.
455mm (18″) wide laminating roll.
75 micron film on a 25mm (1″) core.
100m on a roll.
For use with roll fed laminators only.
Ideal for encapsulating posters, flyers, menus, maps, notices and more
Priced individually, 2 rolls are needed (one for the top and one for the bottom)
Premium quality gloss low melt laminating rolls.
455mm (18″) wide laminating roll.
38 micron film on a 25mm (1″) core.
150m on a roll.
For use with roll fed laminators only.
Ideal for encapsulating posters, flyers, menus, maps, notices and more.
Priced individually, 2 rolls are needed (one for the top and one for the bottom)
Premium quality gloss low melt laminating rolls.
635mm (25″) wide laminating roll.
38 micron film on a 25mm (1″) core.
150m on a roll.
For use with roll fed laminators only.
Ideal for encapsulating posters, flyers, menus, maps, notices and more
Priced individually, 2 rolls are needed (one for the top and one for the bottom)
